batte melt pump

Rubber Extrusion Screen Changer | Continuous Hydraulic Screen Changer for Rubber & Elastomer Extrusion

A rubber extrusion screen changer is a critical continuous filtration unit installed on rubber extrusion lines, normally placed between rubber extruder and melt pump or die. Unlike plastic melt, rubber compounds feature high viscosity, strong elasticity, heat sensitivity and high filler loading (carbon black, calcium carbonate). Residual impurities, undispersed agglomerates, metal particles and scorch lumps easily cause surface defects, die blockage and frequent production stops. This rubber-specific screen changer removes contaminants while supporting non-stop screen swap, delivering stable flow and protecting downstream precision equipment.

Most rubber screen changers adopt hydraulic dual-station design: one station is online for filtration, while the standby station can be prepped or replaced. When the filter screen clogs and system pressure rises to the preset threshold, the hydraulic piston switches stations rapidly. Optimized flow channel, small dead zone and independent cooling structure are core for rubber processing — they minimize rubber stagnation and avoid premature scorch or crosslinking, which is the biggest difference from general plastic screen changers.

screen changer in extruder

Core Advantages of Rubber Extrusion Screen Changer

Effective Filtration & Better Rubber Surface Quality

It traps carbon black agglomerates, foreign particles, gel lumps and undispersed rubber chunks. Finished rubber profiles, tire treads and hoses have fewer black spots, pinholes and surface streaks, lowering reject rate.

Non-Stop Screen Change, Minimum Production Loss

Hydraulic fast switching completes screen replacement within seconds without shutting down the extruder. Pressure fluctuation during switching is tightly controlled, avoiding large dimension variation of extruded rubber.

Anti-Scorch Low-Dead-Zone Flow Path

Streamlined runner and targeted cooling structure reduce material residence time. Suitable for heat-sensitive rubber such as NR, NBR, EPDM, CR and silicone rubber.

Protect Die & Melt Pump

Filter out abrasive hard impurities before they reach the die or rubber melt pump, reducing wear of alloy gears and die orifice, extending service life of your precision extrusion auxiliary.

Wide Compatibility with Filled Rubber

Works well with high-carbon-black, high-mineral-filled rubber compounds. Hardened alloy breaker plate and wear-resistant sealing structure resist abrasion under high-viscosity rubber pressure.

Easy Operation & PLC Pressure Monitoring

Equipped with pressure transmitters for automatic alarm and trigger switching. It can integrate into the whole extrusion control system, supporting manual or auto mode for different operator habits.

non-stop rubber screen changer

Common Types

Single plate dual station screen changer: compact, cost-effective, popular for rubber seal strip, cable rubber insulation

Dual piston / double column screen changer: larger filtration area, stable for high-output tire tread and sidewall extrusion

Manual screen changer: low budget, for small batch rubber lab lines or low-output compounding

Typical Application Scenarios

Tire industry: tread, sidewall, inner liner extrusion

Automotive rubber: EPDM weather sealing strips, vibration damping rubber parts

Rubber hose & tube: industrial hydraulic hose, water rubber hose

Cable rubber insulation, rubber sheet, rubber gasket and blended elastomer extrusion

Matched with rubber melt pump to form a complete filtration + metering extrusion system

non-stop rubber screen changer

Key Technical Specifications

Alloy nitrided body and breaker plate, wear resistance for abrasive filled rubber

Independent cooling circuit to control rubber residence temperature

Self-compensating sealing, no leakage under high rubber viscosity

CE certification, available for global rubber machinery integrators

Custom flow rate, flange size and connection layout for existing extruders

Multiple mesh combinations: coarse support mesh + fine filter mesh for graded filtration

For rubber manufacturers focusing on stable extrusion, fewer black spots and less unplanned downtime, a dedicated rubber extrusion screen changer is an essential upstream protection unit to maximize the value of your extruder and melt pump.

Email: sale@meltpump.com

WhatsApp: +86 158 3833 1071



©2019 Batte Mechanical Zhengzhou Co,.Ltd. All rights reserved. sales@battemachinery.com
Batte is a professional screen changer manufacturer, supplying screen changer, especially screen changer for extrusion mould