batte melt pump

manual screen changer plastic extrusion

A manual screen changer for plastic extrusion** is a core melt filtration component installed between the extruder barrel and die head, widely used to filter impurities, carbon residues and foreign particles in molten polymer during plastic extrusion production. It protects downstream dies, molds and melt pumps, stabilizes melt pressure, and improves the surface quality of finished plastic products such as blown film, sheets, pipes, profiles and granulation materials.

Different from hydraulic or continuous automatic screen changers, the manual screen changer adopts a slide-plate / lever manual switching structure. Operators pull or push the slide plate by hand to replace the screen pack during planned line shutdown. It is designed with a breaker plate to hold filter meshes, with pressure-activated sealing to prevent melt leakage under working pressure.

 

manual screen changer in extruder

Core Advantages

Low initial investment & low maintenance cost

Simple mechanical structure, fewer hydraulic seals, cylinders and electrical control parts. No hydraulic station required. It cuts your spare parts budget and maintenance difficulty, perfect for small factories and startup extrusion lines.

Compact footprint & easy installation

Flange direct connection design, compatible with most single-screw extruders. It fits limited workshop space and can be customized for different extruder diameters.

Easy operation & simple training

Operators can finish screen replacement after basic guidance. The handle can be rotated to a suitable angle according to site layout. The sealing surface is precision ground for stable leakproof performance after repeated screen changes.

Wide material compatibility

Works well with PP, PE, PS, ABS, PLA, EVA and recycled plastic materials. Suitable for blown film, sheet extrusion, pipe extrusion, plastic granulation and lab extrusion lines.

Low pressure drop

Optimized runner design reduces melt stagnation and pressure loss, avoiding material degradation for heat-sensitive polymers.

screen changer for plastic sheet extruder

Working Principle

When molten plastic flows out from the extruder, it passes through the screen pack and breaker plate inside the manual screen changer. Impurities are trapped by the filter mesh. As dirt accumulates, melt backpressure rises. When pressure reaches the preset value, stop the extruder, release pressure, pull out the slide plate manually, take out the contaminated screen pack, install a new filter combination, push the slide plate back, restart the line and resume production.

Typical Application Scenarios

Small & medium blown film lines (PE film, agricultural film, packaging film)

PP/ABS/PS sheet and plate extrusion

Plastic pipe and profile extrusion

Plastic pelletizing / recycling extrusion lines

Laboratory and pilot extrusion machines

Lines with low contamination virgin material and infrequent screen replacement

manual screen changer

Manual screen changers are recommended for low-to-medium output extrusion lines, usually under 150kg/h. It is the best choice if you change screens only during planned stops for color change, die cleaning or routine maintenance. If your production requires non-stop continuous operation, high output and frequent screen swapping, hydraulic or automatic screen changers will be more suitable.

Email: sale@meltpump.com

WhatsApp: +86 158 3833 1071



©2019 Batte Mechanical Zhengzhou Co,.Ltd. All rights reserved. sales@battemachinery.com
Batte is a professional screen changer manufacturer, supplying screen changer, especially screen changer for extrusion mould